|
 |
 |
| |
| NewLife Intensity |
| NewLife Intensity 10 is AirSep's new, maximum pressure/maximum flow oxygen concentrator, which is uniquely designed to serve high prescription patients or those who also need the outlet pressure that can drive special respiratory devices such as jet nebulizers and venti-masks. This concentrator can replace the need for external compressors, etc. The NewLife Intensity 10 dual flow unit can save on equipment needs and overall power consumption as well, as it may be possible to serve two patients simultaneously up to a maximum total flow of 10 LPM with one unit.
Operating at 20 psig (138 kPa), with up to 10 LPM single or combined dual flow capability, NewLife Intensity 10 is the only concentrator in today's marketplace that enables both high pressure and high flow in one unit. |
|
| |
All units can be equipped with or without oxygen monitor to verify concentration.
NewLife Intensity 10 is available through authorized, local oxygen equipment providers. |
|
| |
|
| Specifications » |
| Oxygen Concentration* |
: |
2–9 LPM at 92% ±3%; 10LPM at 90% ±3% |
| Oxygen Outlet Pressure |
: |
20 psig (138 kPa) |
| Dimensions |
: |
27.5 in. high x 16.5 in. wide x 14.5 in. deep (69.9 cm high x 41.9 cm wide x 36.8 cm deep) |
| Weight |
: |
58 lb (26 kg) |
| Power |
: |
120 VAC, 60 Hz; 220-240 VAC, 50 Hz; 220 VAC, 60 Hz |
| Power Consumption |
: |
590 Watts |
| Alarms |
: |
Power failure, high and low pressure, temperature, battery test, low oxygen concentration (with optional oxygen monitor) |
| Temperature Range |
: |
Operational temperature: 41ºF to 95ºF (5ºC to 35 ºC.) (Operating unit outside of this range can affect performance.) |
| Storage Temperature |
: |
-4°F to 140°F (-20°C to 60°C) |
| *Based on an atmospheric pressure of 14.7 psia (101 kPa) at 70°F (21°C). |
| *Specifications subject to change without notice. |
|
|
|
| |
| Topˆ |
|
|
| |
|
